A device to measure temperature, humidity and magnetic field based on the Bluetooth Low Energy. The device has a wide range of applications in many businesses such as:
• Agriculture companies (to monitor greenhouses and storage spaces)
• Transport companies (to monitor refrigerated trucks and their doors)
• Logistics (to monitor storage conditions)
• Heavy and light industry companies (to monitor conditions in mines or on assembly lines)
• Pharmaceutical companies (to monitor conditions in storage spaces and during transportation)
Our fully autonomous sensor runs on a lithium battery that doesn't require maintenance. It is a wireless device; therefore, no cabling is needed. The sensor can be fixed on an even surface with self-tapping screws. The configuration and fine-tuning of the device is done via the SMS mobile app available on both iOS and Android devices.
Main Advantages
• The sensor collects data on a wide range of parameters
• Wireless Bluetooth LE technology means low power consumption
• Easy to configure and install
• Battery lifetime of up to 3 years
• Data storage (‘black box’)
• Lower installation costs:
- No risks of cables wearing out or getting sabotaged
- The sensor is easy to remove and install on a different spot
- Easy to mount and maintain
Excavators work control
Sensor is set to an arm of an excavator and transmits information on its status to a monitoring unit only when actual bucket manipulation is performed, defining the total duration of work and idling, as well as time of the initial and the last bucket manipulation. Thus, you will always know the exact amount of work performed.
Crane operation control
Sensor is installed to a boom of a crane, reporting to the monitoring tracker an information about the beginning and the end of the work, the number of lifts, the duration of the work.
Tipper truck work control
Sensor mounted on the lifting body of a tipper, reporting to the tracker on each rollover of the body, namely, the start and end of the body operation, the amount and duration of the unloading cases.
Harvester work control
Sensor mounted on the combine harvester header. The angle meter informs on the lift height of the header, so that you will always know the exact amount of work performed.
